Rocket Motor Test Moves NASA’s Space Launch System Closer to Deep Space
By Business Wire News
By Business Wire News
NASA and Orbital ATK (NYSE: OA) today conducted the first qualification ground test of the five-segment rocket motor that will be used for NASA’s heavy-lift Space Launch System (SLS), which is being designed to enable exciting new exploration missions throughout the solar system.
NASA’s and Orbital ATK’s successful test of Qualification Motor 1 (QM-1) is an important milestone in validating the rocket motor’s use for NASA’s heavy-lift Space Launch System. SLS is being designed to enable exciting new exploration missions throughout the solar system. (Photo: Business Wire)
The successful pre-flight test, known as Qualification Motor 1 (QM-1), is an important milestone in validating the rocket motor’s use for SLS and its deep space missions. Initial test data indicate the motor performed as designed and delivered the anticipated performance. The rocket motor produced approximately 3.6 million pounds of thrust (equivalent to 22 million horsepower) and fired for just over two minutes. More data will be available as post-test analysis is accomplished on the 102 design objectives that are supported by 531 instrumentation channels.
“This motor firing is the first of two qualification tests to certify the motor configuration for NASA’s Space Launch System,” said Charlie Precourt, Vice President and General Manager of Orbital ATK’s Propulsion Systems Division, and four-time space shuttle astronaut. “The data from today and from our three development motor tests, along with information we have collected on hundreds of predecessor motors over the past three decades, confirms this is the most capable and powerful solid rocket motor ever designed.”
Measuring 12 feet in diameter and 154 feet in length, Orbital ATK’s five-segment motor is the largest human-rated solid rocket motor built today. When it is fully assembled as a booster, it will be 177 feet tall (approximately 17 stories). It produces 20 percent more power than the previously-used four-segment motor, and it also uses new materials that provide cost and weight savings. The five-segment motor was designed to maximize safety while providing a reliable and affordable launch capability for human missions deeper in the solar system than we have ever gone before – including to the surface of Mars.
“NASA’s SLS, along with the Orion crew capsule, enables us to blaze new trails, and embark on missions to deep space that leverage more than five decades of pushing boundaries,” said Blake Larson, Orbital ATK’s Chief Operating Officer. “Deep space missions require a heavy-lift vehicle to ensure success, and SLS and Orion can accomplish a deep space mission in fewer launches than current or planned vehicles.”
Today’s qualification test included newly-designed avionics hardware and equipment to control the motor and provide improved test monitoring capability. Other test improvements include a new main pivot flexure design in the forward thrust block to transfer the massive forces from the test into the various load cells for thrust monitoring, as well as an added mid-span support that assisted in adjusting the motor centerline to make the test more consistent with actual flight conditions.
“This is an exciting time for exploration, as we venture farther into space,” said Precourt. “The promise of deep space exploration will inspire the next generation to pursue careers in science, technology, engineering and math – preparing them to run the missions we’re designing.”
NASA’s SLS will launch on its first mission, Exploration Mission-1, in just a few years. The next major milestones for SLS include Boeing’s Vertical Assembly Center core stage welding, continued testing of Aerojet Rocketdyne’s RS-25 engine at NASA’s Stennis Space Center, avionics and controls testing at Marshall Space Flight Center, and Orbital ATK’s QM-2 static firing next year.
The SLS and Orion programs are supported by a network of hundreds of suppliers representing 47 states. Orbital ATK has 29 key SLS booster suppliers across 16 states: Alabama, Arizona, California, Connecticut, Indiana, Kentucky, Massachusetts, Minnesota, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Texas, Utah and Wisconsin.
About Orbital ATK
Orbital ATK is a global leader in aerospace and defense technologies. The company designs, builds and delivers space, defense and aviation systems for customers around the world, both as a prime contractor and merchant supplier. Its main products include launch vehicles and related propulsion systems; missile products, subsystems and defense electronics; precision weapons, armament systems and ammunition; satellites and associated space components and services; and advanced aerospace structures. Headquartered in Dulles, Virginia, Orbital ATK employs more than 12,000 people in 20 states across the U.S. and in several international locations. For more information, visit www.orbitalatk.com.
Orbital ATK, Inc.
Kay Anderson, 435-230-2787
Propulsion Systems Public Relations
Orbital ATK, Inc.
Barron Beneski, 703-406-5528
Public and Investor Relations