MRO Magazine

Endress+Hauser introduces flowmeter line

January 1, 2022 | By Maryam Farag

Photo: Endress+Hauser.

Photo: Endress+Hauser.

Proline 10, new line of flowmeters from Endress+Hauser, provides savings over the product life cycle without limitation on measurement performance.

Every device is tested on accredited and traceable calibration rigs per ISO/IEC 17025.

In the food and beverage industry, the device measures the admixture quantity of animal fats or carbon dioxide during beverage carbonization. Promass K 10 is a device for accurate quantity measurement in sub-metering distribution networks.

In addition to mass flow, Promass K 10 measures volume flow, temperature, and optionally density. With its Gas Fraction Handler function, Promass K 10 provides accurate measurements of even inhomogeneous liquids with entrained gas.


Proline Promag 10 is optionally available with conductivity measurement (Promag W/P/H) or temperature measurement (Promag H).

Another order option is “0 x DN full bore” for the Promag W 10. Electromagnetic flowmeters with this option can be installed without inlet and outlet runs.

Promag and Promass sensors can be combined with four different Proline 10 transmitters:

  • Without display, measurement data can be queried via communication protocols.
  • With two status LEDs, operated via Bluetooth with the SmartBlue app.
  • With a 2.4″ LCD display which can be used to read data, with the SmartBlue app is used for configuration and operation.
  • With a 2.4″ LCD touchscreen that can be operated with common touch gestures, or by using the SmartBlue app.




Stories continue below

Print this page