Freescale Expands Portfolio of Highly Integrated Battery Cell Controllers to Support Low Cell Count Connected Applications

AUSTIN, Texas

Freescale Semiconductor today introduced the MC33772 3- to 6-cell lithium-ion battery cell controller, expanding its portfolio of highly integrated and connected solutions for reducing BOM cost, increasing operating robustness and meeting stringent functional safety requirements for automotive and industrial battery systems powering the solid-state Internet of Tomorrow.

Together with its previously announced MC33771 14-cell battery cell controller, the MC33772 product expands Freescale’s hardware- and software-compatible battery cell controller portfolio to encompass a full range of single chip 3- to 14-cell solutions. Supporting a broad array of battery chemistries, including lithium iron phosphate, lithium nickel manganese cobalt oxide, lithium titanate, and lithium polymer, Freescale’s comprehensive cell controller portfolio helps customers easily scale solutions to meet different battery management needs without requiring new R&D investments. In addition, Freescale battery cell controllers feature advanced diagnostics and functional verification supporting ISO 26262 ASIL-C requirements within a single chip.

Lead-acid automotive batteries are increasingly being replaced by Li-ion chemistries to reduce weight, increase reliability and boost energy efficiency for engine start-stop systems and energy recuperation technologies. Recent advances in Li-ion battery chemistry for cold temperature operation and cold cranking power now enable Li-ion batteries to displace lead-acid even as the starter battery. As a result, the inherent challenges of overcharge, overheating and internal short circuit are increasingly managed by electronics. To maintain safe operating conditions and ensure system-wide control of the battery, next-generation battery cell controllers like Freescale’s must provide accurate, reliable battery diagnostics and high speed communication of status.

With its comprehensive feature-set, Freescale’s new MC33772 battery cell controller supports this paradigm shift, providing a single chip solution optimized for all critical performance and safety duties, and featuring robust functional verification supporting ISO 26262 ASIL-C requirements, which help protect automotive and industrial battery packs against critical fault conditions. Higher level ASIL-D system implementations can also be realized using multiple Freescale battery cell controllers for redundancy.

“Drivers face a host of issues and concerns about their lead-acid batteries, many of which are caused by outside elements like extreme temperatures that are hard to control, causing about 100 million batteries to be replaced every year in the U.S. alone,” said James Bates, senior vice president and general manager for Freescale’s Analog & Sensors Group. “With the expansion of our broad portfolio of battery cell controllers, Freescale is helping reduce those concerns, making it easier for our customers to offer an effective Li-ion alternative to lead-acid, while meeting stringent performance and functional safety requirements across a wide variety of battery sizes and types.”

In addition to 14V Li-ion battery packs, the MC33772 product’s optimized feature set is well suited for reducing system electronics BOM cost in a broad range of automotive and industrial battery management applications, including 48V battery systems, high voltage hybrid and electric cars, E-bikes and energy storage systems. The MC33772 delivers an optimal balance of measurement accuracy, scalability and high speed isolated communications. It supports rapid, 2Mbps communication of battery health and conditions for a variety of battery management system topologies, including centralized, distributed CAN and distributed daisy chain systems.

Key Features:

• Available in 3, 4, 5 and 6 cell versions
• 5V (SPI)/7V (TPL) ≤ VPWR ≤ 30 V operation, 40 V transient
• SPI or isolated 2 MHz differential communication using MC33664 TPL
• Current sensor with ±0.5% accuracy from milliamps to kiloamps
• 6x differential cell voltage measurement and stack voltage measurement
• Synchronized cell voltage/current measurement
• Coulomb counting
• 7x ADC/GPIO/temperature sensor inputs
• Addressable on initialization
• 6x onboard 300 mA passive cell balancing drivers w/ dedicated timers
• Low-power modes
• 48-pin QFP package

The MC33772 is engineered to help customers easily meet stringent ISO 26262 ASIL-C requirements through integrated functional verification and advanced diagnostic features in single-chip. An ASIL-D system level implementation is also possible with Freescale battery cell controllers, allowing customers to meet multiple functional safety concepts and address safety system level requirements. As a Freescale SafeAssure functional safety solution, this portfolio meets rigorous standards for ESD, EMC, low current consumption and AEC-Q100 automotive qualified design.

Availability and Pricing

Freescale offers hardware to support the MC33771 and MC33772 battery cell controllers and the MC33664 transformer physical layer with the KIT33771ASP1EVB, KIT33772ASP1EVB and KIT33664EVB evaluation kits. These boards are engineered to accelerate time-to-market and demonstrate the benefits of the multiple embedded functions of the products.

The MC33771, MC33772 and MC33664 products are sampling now. The MC33771 and MC33664 products are expected to be in production by Q4 2015, while the MC33772 product is planned for production by Q2 2016. The MC33771 will be available for a suggested retail price starting at $4.86 (USD) in 10kU quantities, and the MC33772 will be available for a suggested retail price starting at $3.46 (USD) depending on cell count and feature set. The MC33664 will be available for a suggested retail price of $1.65 (USD) in 10kU quantities. Please contact Freescale sales for additional quantities. For more information, please visit: http://www.freescale.com/Battery.

Freescale SafeAssure program: Functional Safety. Simplified.

The Freescale SafeAssure functional safety program is designed to help system manufacturers more easily achieve system compliance with functional safety standards: International Standards Organization (ISO) 26262 and International Electrotechnical Commission (IEC) 61508. The program highlights Freescale solutions – hardware and software – that are optimally designed to support functional safety implementations and come with a rich set of enablement collateral. For more information, visit www.freescale.com/SafeAssure.

About Freescale Semiconductor

Freescale Semiconductor (NYSE:FSL) enables secure, embedded processing solutions for the Internet of Tomorrow. Freescale’s solutions drive a more innovative and connected world, simplifying our lives and making us safer. While serving the world’s largest companies, Freescale is also committed to supporting science, technology, engineering and math (STEM) education, enabling the next generation of innovators. www.freescale.com

Freescale, the Freescale logo and SafeAssure are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc.

View source version on businesswire.com: http://www.businesswire.com/news/home/20150916005409/en/

Freescale Semiconductor
Americas
Jack Taylor, 512-560-7143
jack.taylor@freescale.com
or
Asia Pacific
Gloria Shiu, (85-22) 666-8237
gloria.shiu@freescale.com
or
Europe, Middle East and Africa
Laurent Massicot, (33-16) 935-7712
laurent.massicot@freescale.com
or
India
Anjali Srivastava, (91-120) 395-0000
anjali.srivastava@freescale.com
or
Japan
Kiyomi Masuda, (81-3) 5437-9392
R31989@freescale.com