MRO Magazine

Design Competition Demonstrates Promising Future for Additive Manufacturing in Satellite Design


August 25, 2015
By Business Wire News

MINNEAPOLIS & REHOVOT, Israel

Stratasys Ltd. (Nasdaq:SSYS), aleading global provider of 3D printing and additive manufacturing solutions, along with its subsidiaries GrabCAD and MakerBot, has announced the winners of the CubeSat Challenge after a month-long, highly competitive engineering competition.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20150825006077/en/

First place was Paolo Minetola for FoldSat, a design that uses geometries only possible with 3D prin ...

First place was Paolo Minetola for FoldSat, a design that uses geometries only possible with 3D printing. (Photo: Paolo Minetola)

Home to the world’s largest community of mechanical engineers, the GrabCAD Community was invited to use 3D printing to rethink the design of a CubeSat, a standardized small satellite frame originally developed to allow university students to build low-cost satellites for research and education purposes. The goal was to design CubeSat structures that would be faster and easier to manufacture, and pack more utility into the very small volume that CubeSat designers had to work with. Participants had the chance to win prizes that range from MakerBot Replicator Desktop 3D Printers to cash to manufacturing services provided by Stratasys Direct Manufacturing.

Surpassing expectations, over 200 entries were submitted from all engineering disciplines and geographic locations. The submissions demonstrate the ability of additive manufacturing to vastly improve design over traditional manufacturing methods. “Engineers were able to reduce satellite structures from up to 50 parts down to two or three parts by using additive manufacturing,” said Scott Sevcik, business development manager for aerospace and defense at Stratasys. “There were a number of very creative approaches to redesigning the satellite structure, and it was great to see several of the entries consolidate the build down to two or as few as one part. That highlights one of the most significant benefits of 3D printing a structure.

Reducing part count from 50 to three can make a significant impact on a manufacturer’s operations. It can:

  • Reduce the amount of assembly labor, which saves cost and time.
  • Reduce the risk of assembly error, or a late part delaying production.
  • Reduce the risk of repetitive stress and other ergonomic injuries due to assembly effort.
  • Simplify the supply chain, reducing purchasing, receiving inspection and other ancillary risks and costs.

First place was awarded to Paolo Minetola for his entry FoldSat, a design that uses geometries only possible with 3D printing. Second place went to David Franklin for his entry STRATASATT – FDM ONE, a design that illustrates customization using real CubeSat components. Third place went to Chris Esser with his entry Foldable Articulated CubeSat for Additive Manufacturing. His design featured 3D printed threads and six hinged panels.

Entries were judged based on technical requirements including feasibility, production, value and being optimized for additive manufacturing. The judging panel included experts from the aerospace and 3D printing industry:

  • Dr. Jordi Puig-Suari, Cal Poly Professor and Co-Inventor of the CubeSat Standard
  • Dr. Robert Hoyt, CEO and Chief Scientist, Tethers Unlimited Inc.
  • David Espalin, Center Manager – W.M. Keck Center for 3D Innovation, University of Texas, El Paso
  • Adam Hadaller, Mission Manager, Spaceflight Industries
  • Patrick Price, Aerospace Additive Manufacturing Research Engineer, Stratasys
  • Jesse Marin, Aerospace Project Engineer, Stratasys Direct Manufacturing
  • Jonathan Cook, Director of Product, MakerBot

Visit the GrabCAD CubeSat Challenge results page to view the winning designs. The Aerospace vertical solutions team sponsored the CubeSat Challenge, with collaboration from GrabCAD, MakerBot and Stratasys Direct Manufacturing.

To learn more about the capabilities of Stratasys 3D Printers and Production Systems, visit the website. To participate in a GrabCAD challenge or inquire about sponsoring your own, visit the website.

Stratasys Ltd. (Nasdaq:SSYS), headquartered in Minneapolis, Minnesota and Rehovot, Israel, is a leading global provider of 3D printing and additive manufacturing solutions. The company’s patented FDM® and PolyJet™3D Printing technologies produce prototypes and manufactured goods directly from 3D CAD files or other 3D content. Systems include 3D printers for idea development, prototyping and direct digital manufacturing. Stratasys subsidiaries include MakerBot and Solidscape, and the company operates the digital parts manufacturing service, Stratasys Direct Manufacturing. Stratasys has more than 3,000 employees, holds over 800 granted or pending additive manufacturing patents globally, and has received more than 30 awards for its technology and leadership. Online at: www.stratasys.com or http://blog.stratasys.com

Stratasys is a registered trademark of Stratasys Ltd. and/or its subsidiaries or affiliates.

MakerBot
MakerBot, a subsidiary of Stratasys Ltd. (Nasdaq: SSYS), is leading the next industrial revolution by setting the standards in reliable and affordable desktop 3D printing. Founded in 2009, MakerBot sells desktop 3D printers to innovative and industry-leading customers worldwide, including engineers, architects, designers, educators and consumers. The company has one of the largest installed bases and market shares of the desktop 3D printing industry, with more than 80,000 MakerBot desktop 3D printers in the world. The robust MakerBot 3D Ecosystem makes 3D printing easy and accessible for everyone. To learn more about MakerBot, visit: www.makerbot.com.

GrabCAD
GrabCAD, a subsidiary of Stratasys, helps engineers get products to market faster by making it simple to manage and share CAD files. GrabCAD Workbench makes it easy for engineers to manage and share files, work with partners and complete projects on time, while the GrabCAD Community accelerates the design process by tapping into the knowledge and resources of the largest source of CAD content and engineering minds in the world. Founded in 2010, the company is headquartered in Cambridge, MA with development offices in Estonia and the UK, and was acquired by Stratasys, Inc in 2014. To participate in a GrabCAD Challenge or inquire about sponsoring your own, visit GrabCAD.com/challenges.

Attention Editors, if you publish reader-contact information, please use:

  • USA 1-877-489-9449
  • Europe/Middle East/Africa +49-7229-7772-0
  • Asia Pacific +852 39448888

Stratasys Media Contacts
USA
Stratasys
Ted Hebert, +1-978-495-5522
ted.hebert@stratasys.com
or
Europe
Jonathan Wake / Miguel Afonso, +44-1737-215200
UK Bespoke
stratasys@bespoke.co.uk
or
Stratasys
Arita Mattsoff, +972-(0)74-745-4000 (IL)
arita@stratasys.com
or
Joe Hiemenz, +1-952-906-2726 (US)
joe.hiemenz@stratasys.com
or
Asia Pacific
Stratasys AP
Janice Lai, +852 3944 8888
ap.media@stratasys.com
or
Japan
Stratasys Japan
Aya Yoshizawa, +81 90 6473 1812
Aya.yoshizawa@stratasys.com
or
Korea
Stratasys Korea
Janice Lai, +852 3944 8888
ap.media@stratasys.com
or
Greater China
Stratasys Shanghai
Icy Xie, +86-21-26018886
icy.xie@stratasys.com
or
Mexico
Stratasys Mexico
Erica Massini, +55 11 2626-9229
erica.massini@stratasys.com
or
Brazil
Tatiana Fonseca, +55-11-3846-9981
GAD Communications
tatiana@gadcom.com.br
or
MakerBot Media Contact
Johan-Till Broer, 347-238-2409
Public Relations Manager
johan.broer@makerbot.com
or
GrabCAD Media Contact
Lindsey Christensen, 617-825-0313
Director of Marketing
lindsey@grabcad.com