Low-cost instrument measures vibration
The Viber-G combination instrument is used for measuring overall vibration and for bearing condition monitoring. This low-cost instrument is ideal for maintenance personnel who perform daily machinery...
September 1, 2000 | By MRO Magazine
The Viber-G combination instrument is used for measuring overall vibration and for bearing condition monitoring. This low-cost instrument is ideal for maintenance personnel who perform daily machinery monitoring checks, such as shift mechanics, or the PM specialist, who can use it to take a general overall reading or run a soft foot test without having to do a full scale vibration analysis.
Benchmark Maintenance Services Inc.
Reader Service Card No. 388
Features added to infrared thermometers
The newly upgraded Raytek Raynger ST Series of infrared thermometers includes the ST-Pro and ST-ProPlus. Advantages of the models include best-in class optical performance, expanded temperature ranges (i.e. up to 545C at the high end of the ST80 model), improved laser sighting, enhanced data storage, and greater versatility though features such as a probe jack for an optional contact temperature measurement probe.
Reader Service Card No. 389
Radial and thrust bearing line is comprehensive
Rollway’s specially engineered radial and thrust bearings can be applied on equipment for rolling mills, plastics and rubber extrusion, mining and construction, petrochemical processing, and on pumps and compressors. Catalogue RB-00 contains details, applications and engineering data for the bearings, which include standard cylindrical radial, cylindrical thrust, tapered thrust and steel cage journal models, as well as various types for special applications.
Emerson Power Transmission
Reader Service Card No. 390
3 steps to effective sealing
Chicago Rawhide offers a three-step Sealing Solution for virtually every shaft seal application. Step 1 is a quality seal that keeps bearing lubricants in place and contaminants out. CR’s Waveseal, for example, has bi-directional, hydro-dynamic pumping action. Step 2 is a good shaft, and CR’s Speedi-Sleeve is a quick way to repair a worn shaft. Step 3 is extra contaminant protection, in CR’s case by using an all-rubber Forsheda V-ring that holds itself in place on the shaft and repels water and contaminants by a centrifugal “slinger” action.
Reader Service Card No. 391
Device quickly measures parallelism on punch presses
A new parallelism verification device (PVD) is specifically designed to verify parallel distances between the ram (platen) and bolster (platen) on punch presses. It comes as a kit in a wooden carrying case, allowing millwrights to verify parallelism in a few minutes, instead of using micrometers or ground blocks. The PVD comes in four models covering a height range of 4.75 in. to 107.687 in.
Upton & Sullivan Co. Ltd.
Reader Service Card No. 392
Severe duty motors priced like standard TEFC units
The new WEG W21 Severe Duty line of motors are fully interchangeable with previous designs yet offer many improvements, including severe duty capabilities at standard prices. Performance improvements include reduced noise levels, inverter duty characteristics and increased locked rotor time. Product quality improvements include copper wires, insulation materials, impregnation system and end bells, terminal boxes, drain plugs, keyways and greater safety in shipping. The W21 line is available up to 500 hp in all voltages.
V.J. Pamensky Canada Inc.
Reader Service Card No. 393MRO