Monitor high AC current loads
NK Technologies introduces the ATS Current Sensing Switch and Transducer. The ATS series is a one piece solution that combines a limit alarm with an analog output signal transducer to monitor produced or consumed AC current up to 1200 amps, while magnetically isolating outputs and inputs to maximize safety. An innovative and patent pending rotary switch makes it easy for users to set the trip point. DIN rail mounting simplifies installation and provides an extremely secure mount that is resistant to conductor movement.
“The ATS series is an invaluable preventive maintenance tool for anyone responsible for monitoring high AC current loads. With the ATS series users can monitor air handling blowers, pumps, crushers and many other large loads with a single self-contained current switch, and the built-in analog signal helps users identify bearing wear and other mechanical problems before they result in unplanned and costly downtime,” says Philip Gregory, president of NK Technologies. “What’s more, their function is matched by their ease of use. With the ATS Series all that is required for operation is to snap the unit onto a DIN rail, connect it to a power source and connect the outputs to the controller.”
In contrast, monitoring high current loads often requires a current transformer sized for the maximum current that will be used and the 5 amp secondary of the current transformer is then connected to a shorting block for safety. The connection then runs from the shorting block to a signal conditioner to produce the analog output proportional to the current, or to a different type of signal conditioner to produce an alarm relay contact. Once these connections are made the controller can be connected to the signal conditioner outputs. It requires a great deal of time to interconnect these components, plus the time expended to adjust the signal outputs to match the primary load characteristics.