DAILY NEWS Nov 15, 2012 5:02 AM - 0 comments

Firm fined $75,000 after worker injured in robot cell

TEXT SIZE bigger text smaller text
2012-11-15

Guelph, ON -- Vehcom Manufacturing Ltd., a Guelph auto parts manufacturer, has been fined $75,000 for a violation of Ontario’s Occupational Health and Safety Act after a worker was injured.

On June 11, 2010, a young worker at Vehcom's industrial facility located at 74 Campbell Road in Guelph, worked on a production line known as the ATX line. This production line consisted of four machining centres and a fenced-off robot cell containing a large robotic arm. A jam occurred in the robot cell and the worker entered the area in order to access the machining centre and clear it. Upon clearing the jam, a steel rod activated, causing injuries to the worker's hand.

An Ontario Ministry of Labour investigation found that the machine was not shut down or locked out when the worker entered to clear the jam.

Vehcom Manufacturing Ltd. pleaded guilty to failing to ensure that the machine was equipped with and guarded by a guard or other device that prevented access to a pinch point.

The fine was imposed by Justice of the Peace A. James Child. In addition to the fine, the court imposed a 25% victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.


Horizontal ruler
Horizontal Ruler

Post A Comment

Disclaimer
Note: By submitting your comments you acknowledge that MRO Magazine has the right to reproduce, broadcast and publicize those comments or any part thereof in any manner whatsoever. Please note that due to the volume of e-mails we receive, not all comments will be published and those that are published will not be edited. However, all will be carefully read, considered and appreciated.

Your Name (this will appear with your post) *

Email Address (will not be published) *

Comments *



* mandatory fields